Influence of molecular weight on the short‐channel effect in polymer‐based field‐effect transistors

In this study, we demonstrate how the intrinsic properties of a polymer can influence the electrical characteristics of organic field‐effect transistors (OFETs). OFETs fabricated with three batches of poly[2‐methoxy,5‐(3′,7′‐dimethyl‐octyloxy)]‐p‐phenylene vinylene (MDMO‐PPV) were investigated. The properties of the polymers were initially investigated using Fourier transform infrared spectroscopy (FTIR), impedance spectroscopy (IS), gel permeation chromotography (GPC), and cyclic voltammetry (CV), respectively. The structure and purity of the polymer batches were found to be very comparable, but the molecular weight (M_n and M_w) and polydispersity (PDI = M_w/M_n), varied between the samples and the HOMO and LUMO levels of the polymers were found to depend on the molecular weight properties. OFETs were then fabricated with the polymers and electrically characterized. It was observed that the channel current and the field‐effect mobility increase with increasing polymer molecular weight. The output characteristics of the transistors, on the other hand, were found to depend on the PDI of the polymer. Saturation of the channel current occurs at higher source–drain voltages and short‐channel behavior was observed to start at longer channel lengths for polymers with a higher PDI. This behavior is observed to be thickness dependent, and the short‐channel behavior was more pronounced for thicker MDMO‐PPV films. These results are explained in terms of influences of chain packing and ordering and high bulk currents on the FET output and transistor parameters. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 117–124, 2012     

Synthesis,electrochemical, in situ spectroelectrochemical and in situ electrocolorimetric characterization of new phthalocyanines peripherally fused to four flexible crown ether moieties

Novel Ni(II), Zn(II), Co(II) and Cu(II) phthalocyanines with four peripheral 4-[methyleneoxy(18-crown-6)] groups have been synthesized via the cyclic tetramerization of 4-[{(18-crown-6)-yl}methyleneoxy]phthalonitrile and the corresponding metal salts (NiCl₂, Zn(CH₃COO)₂, CoCl₂ and CuCl₂). The thermal stabilities of the metal-free and metallophthalocyanine compounds were determined by thermogravimetric analysis. The structures of the target compounds were confirmed using elemental analysis, IR, ¹H-NMR, ¹³C-NMR, UV–Vis and MS spectral data. Voltammetric and in situ spectroelectrochemical measurements show that while the cobalt phthalocyanine complex gives both metal-based and ring-based redox processes, the metal-free, nickel, zinc and copper phthalocyanines show only ring-based reduction and oxidation processes. An in situ electrocolorimetric method has been applied to investigate the color of the electro-generated anionic and cationic forms of the complexes.     

Exact series expansions, recurrence relations, properties and integrals of the generalized exponential integral functions

Generalized exponential integral functions (GEIF) are encountered in multi-dimensional thermal radiative transfer problems in the integral equation kernels. Several series expansions for the first-order generalized exponential integral function, along with a series expansion for the general nth order GEIF, are derived. The convergence issues of these series expansions are investigated numerically as well as theoretically, and a recurrence relation which does not require derivatives of the GEIF is developed. The exact series expansions of the two dimensional cylindrical and/or two-dimensional planar integral kernels as well as their spatial moments have been explicitly derived and compared with numerical values.     

Spectrophotometric determination of Hg(II) in water samples by dispersive liquid liquid microextraction with use ionic liquid after derivatization with a water soluble Fe(II) phthalocyanine

This study reports the synthesis of water soluble iron(II) phthalocyanine and a facile method for spectrophotometric determination of Hg(II) in environmental water samples by ionic liquid based dispersive liquid–liquid microextraction (IL-DLLME). In the method, 1-heptyl-3-methylimidazolium hexafluorophosphate (250 µL) as extraction solvent, acetonitrile (750 µL) as dispersive solvent and Triton X-100 (200 µL) as anti-sticking agent were used. After the extraction of the Hg(II) complex (Hg(II):q-Fe(II)-Pc) into thin droplets of ionic liquid, the sample was centrifuged for 4 min at 2000 rpm. The upper aqueous phase was removed and the residue diluted to 250 µL with methanol and transferred to a 250 µL cell for spectrophotometric detection at 280 nm. The linear range of the method is 0.05–1 µg/mL. The limits of detection and quantification is 0.01 and 0.03 µg/mL, respectively. The RSD for the developed method was calculated as 0.78% at 0.50 µg/mL Hg(II).     

Radiative transfer in one-dimensional hollow sphere with anisotropic scattering and variable medium properties

The effects of variable medium properties on radiation transfer in participating and anisotropically scattering one-dimensional spherical medium were investigated by Tsai et al. (JQSRT 42(3) (1989) 187). The discrete ordinates method solutions they provided for hollow spherical medium cases are incorrect. The correct DOM S₈ and the integral transfer equation solutions are provided.     

Inversion of a generalized Radon transform by algebraic iterative methods

Inversion of a generalized Radon transform (GRT) of seismic type is investigated by employing the algebraic iterative methods ART and SIRT, which require discrete formulations of the reconstruction problem. To this aim, two discretization procedures are proposed: a direct discretization and a discretization via the relation of GRT with the regular Radon transform (RT). The feasibility and the semi-convergence behavior of the proposed methods are analyzed and compared by discussing the effect of noisy data.     

Novel peripherally tetra substituted metal-free,cobalt(II), copper(II) and manganese(III) phthalocyanines bearing polyethoxy chain attached by 2,6-diphenylphenol groups: synthesis,characterization and their electrochemical studies

Metal free (6), cobalt(II) (7), copper(II) (8) and manganese(III) (9) phthalocyanines, which are tetra substituted at the peripheral positions with 2-[2-(1,1′:3′,1′′-terphenyl-2′-yloxy)ethoxy]ethoxy groups, were synthesized and characterized by IR, ¹H-NMR,¹³C-NMR, UV–Vis and mass spectroscopy. Electrochemistry of the phthalocyanines were studied with voltammetric measurements by using cyclic voltammetry and square wave voltammetry techniques in DCM/TBAP electrolyte on a Pt working electrode. Electrochemical measurements exhibit that incorporation of redox active metal ions, Co^II and Mn^III, into the phthalocyanine core extends the redox capabilities of the Pc ring including the metal-based reduction couples of the metal. While Mn^IIIClPc showed only metal based reduction reactions, Co^IIPc showed metal based and ligand based reduction reactions as expected. Cyclic and square wave voltammetric studies showed that phthalocyanines have reversible/quasireversible/irreversible redox processes, which are the main requirement for the technological usage of these compounds.     

Synthesis of nonperipherally tetra-[5-(diethylamino)-2-formylphenoxy] substituted metallophthalocyanines and their electrochemistry

3-[5-(diethylamino)-2-formylphenoxy]phthalonitrile ( n-TY-CN ), metallophthalocyanines n-TY-Co , n-TY-Cu , and n-TY-Mn bearing [5-(diethylamino)-2-formylphenoxy] groups at nonperipheral positions were prepared for the first time. These compounds were characterized with IR, NMR (only for n-TY-CN ), mass and UV-vis (except n-TY-CN ) spectroscopy. Voltammetric characterizations of n-TY-Co , n-TY-Cu , and n-TY-Mn revealed that while n-TY-Co , n-TY-Cu , and n-TY-Mn showed characteristic Pc ring and/or metal-based reduction reaction, n-TY-Co , n-TY-Cu , and n-TY-Mn were coated on the working electrode during the oxidation processes owing to the cationic electropolymerizations of the [5-(diethylamino)-2-formylphenoxy] substituents.     

Entropy generation in a square enclosure with partial heating from a vertical lateral wall

The entropy generation during the transient laminar natural convection in a square enclosure that is partially heated from a vertical lateral wall is numerically investigated. The active sites referring to the main irreversibility locations are determined. The Boussinesq approximation is used in the natural convection modelling. The effects of Prandtl (Pr) and Rayleigh (Ra) number combinations on the entropy generation are investigated. The study is restricted to the fluids of Prandtl number from 0.01 to 1.0, and Rayleigh numbers in the range of 10²–10⁸. It is found that the upper corner of the heated part of the side wall is the active site where the entropy generation initiates due to irreversibilities representing the energy loss.     

A thioxanthone‐based visible photoinitiator

Thioxanthone‐based 9‐(2‐Morpholine‐4yl‐acetyl)‐5‐thia‐napthasen‐12‐one (TX‐MPM) was synthesized and characterized as a one‐component novel visible photoinitiator. Its capability to act as an initiator for the polymerization of methyl methacrylate (MMA) was examined in photoreactor and also daylight. Photophysical properties: fluorescence and phosphorescence emission spectra and fluorescence quantum yield of TX‐MPM (?_f = 0.29) were determined. The phosphorescence lifetime was found 131 ms for TX‐MPM and 110 ms for initiator‐attached polymer (PMMA) at 77 K, indicated a π→π* nature of the lowest triplet state. A model compound, morpholino acetonapthone was used as quencher for the triplet states of TX‐MPM and the quenching rate constant was determined (k_q = 1.26 × 10⁹ M^?1s^?1). According to laser flash photolysis studies, intermolecular hydrogen abstraction process was more dominant path to the formation of the initiating radicals. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011